Fittings list for a 1:24th scale BPB co
70ft MGB & MA/SB
Please note! ALL fittings are sold as cast and are an each price unless sold as a set.
| Code | Picture | Description | Cost
EACH |
Amount Required for Boat |
|
MGB:01 |
Picture to be displayed when available |
PROP SHAFT "SILVER STEEL" 4mm dia x 295mm shaft x 190mm brass tube |
£5.50 each |
2 |
| MGB:02 |
Picture to be displayed when available |
PROP SHAFT "BEARING POST" |
£3.00 each | 2 |
| MGB:03 |
|
20mm AMMO LOCKERS | £2.00 each | 4 |
| MGB:04 |
|
RESIN RUDDERS WITH BRASS SHAFT & TUBE | £3.00 each | 2 |
| MGB:05 |
|
CARLEY FLOAT "OVAL" 78mm x50 mm x 13mm | £3.50 each | 1 |
| MGB:06 |
|
20mm
OERLIKON CANNON ON It's BASE "Additional
parts need to made and fitted by the modeller"
(figure not included) |
£13.00 each | 1 |
| MGB:07 |
Picture to be displayed when available |
ANTI FLAK/SHRAPNEL MATS, 2 SIDES PER MAT. 64mm X 32mm 3.5mm for gun platforms & wheelhouse roofs & sides | £0.80 per side | ? |
| MGB:08 |
Picture to be displayed when available |
ANTI FLAK/SHRAPNEL MATS, 2 SIDES PER MAT. 32mm X 32mm 3.5mm for gun platforms & wheelhouse roofs & sides | £0.40 per side | ? |
| MGB:09 |
|
AIR VENTS 16mm DIA / 40mm HIGH |
£1.00 each | 2 |
| MGB:10 |
|
AIR VENTS
16mm DIA / 22mm HIGH |
£0.75 each | 2 |
| MGB:11 |
|
DEPTH CHARGE ON ITS RACK |
£1.85 each | 2/10 |
| MGB:12 |
Picture to be displayed when available |
AFT DECK HATCH |
£1.00 each | 1 |
| MGB:13 |
|
FORE
DECK HATCH
|
£1.50 each | 1 |
| MGB:14 |
|
ENGINE ROOM HATCH | £1.50 each | 1 |
| MGB:15 |
|
WHEEL HOUSE TOP HATCHES | £1.50 each | 2 |
| MGB:16 |
see above picture |
AIR
VENTS
12mm DIA /16mm HIGH |
£0.50 each | 1 |
| MGB:17 | Picture to be displayed when available | 10ft "PRAM" ROWING BOAT | £5.50 each | 1 |
Please note! Figure, gun site and ammo drum are not included in our gun kit. It is hope to sell the gun complete with figure in the near future.
Parts needed to be made by the modeller for 20mm cannon are : AMMO DRUM, SITE ARM, SITE AND HANDLE.