HSL MOULDINGS

 

Home
Up
Crew Figures
RNLI
Your photos
Featured Boats
Figures on show
PBM Hulls
Order
FAQ
Contacts

 

 

Fittings List for a 1:24th scale 

Harbour Defence Motor Launch.

 

 

PBM HULL HSL FITTINGS.jpg (37412 bytes) 

 

Please note! ALL  fittings are sold as cast and are an each price unless sold as a set.

 

"Click" on each photo to get a full size image!

 

Code Picture Description Cost

EACH

 Amount Required for Boat
HD01  foward con.jpg (26669 bytes) BOW COMPANIONWAY "Brass porthole "NOT" included" £3.75 each 1
HD02 SIMILAR TO ABOVE MID SHIPS COMPANIONWAY £3.75 each 1
HD03 SIMILAR TO ABOVE STERN COMPANIONWAY £3.75 each 1
HD04 depth charge.jpg (31883 bytes) DEPTH CHARGE ON IT’S RACK £1.85 each 8
HD05 15mm vent.jpg (20695 bytes) 16mm dia x 22mm AIR VENT ON BOX £1.50 each 3
HD06 long vent.jpg (37480 bytes) 16mm dia x 52mm HIGH ON BOX £1.50 each 2
HD07 Picture to be displayed when available 12mm & 8mm AIR VENT ON BOX £1.50 each 1
HD08 Picture to be displayed when available 8mm AIR VENT ON BOX £1.00 each 2
HD09 Picture to be displayed when available 10ft "PRAM" ROWING BOAT £5.50 each 1
HD10 lockers.jpg (25684 bytes) AMMO LOCKERS “ BOTH TYPES OF GUN” £2.00 each 4/6
HD11 p039c.jpg (10202 bytes) CARLY FLOAT “OVAL” 78mm X 50mm X 13mm (figure not included) £3.50 each 2
HD12 raft.jpg (42161 bytes) CARLY FLOAT “SQUARE” 78mm X 50mm X 13mm £3.50 each 2
HD13 dan bouy.jpg (37447 bytes) DAN BUOY “ FLOATING MARKER BUOY, FOR ALL ML’s” (See ML 1246) £1.75 each 2
HD15 flak mats.jpg (61331 bytes)

ANTI FLAK/SHRAPNEL MATS, 2 SIDES PER MAT32mm x32mm single mat

 £0.40  each
per side		  
HD16 Picture to be displayed when available .303 MG AMMO LOCKERS £1.00 each 2/4
HD17 Picture to be displayed when available

PROP SHAFTS “sliver steel”       4 mm dia x 267mm shaft/152 mm brass tube, for use with “A” frames.

 £4.50 each 2
HD18  

 
HD19 a frames.jpg (26711 bytes) "A" FRAMES IN BRASS £3.00 each 2
HD20 rudders.jpg (24642 bytes) RESIN & BRASS RUDDER &  BRASS TUBE £3.00 each 2
HD21 Picture to be displayed when available

PROP SHAFTS “sliver steel”       4 mm dia x 267mm shaft/241 mm brass tube

 £5.00 each 2
HD22 Picture to be displayed when available ROPE COIL £2.00 SET OF 3
HD23 flak mats.jpg (61331 bytes) ANTI FLAK/SHRAPNEL MATS, 2 SIDES PER MAT 64mm x32mm double mat £0.80 each
HD24 flag locker.jpg (43038 bytes)

FLAG LOCKER 40mm x 52mm x 11mm 48 sq holes

£1.50 each 2

HD25

 stove pipe.jpg (35027 bytes)

STOVE PIPE resin with aluminium tube 

£1.00 each 3

HD26

 Picture to be displayed when available REAR HATCH £0.50 each 1
HD27 20mm gun.jpg (31176 bytes)

20mm OERLIKON CANNON “ some parts need to be made &  added by the modeller”

(figure not included)

 £13.00 each 1/2
 

Please note! Figure, gun site and ammo drum are not included in our gun kit. It is hope to sell the gun complete with figure in the near future.

Parts needed to be made by the modeller for 20mm cannon are : AMMO DRUM, SITE ARM, SITE AND HANDLE.